Pressure sensors - Pressure monitor

DW34311F

DW34311F
List price
575,90 €
amount price discount
1 575,90 €
5 558,62 € 3% / 17,28 €
10 547,11 € 5% / 28,80 €
20 529,83 € 8% / 46,07 €
50 506,79 € 12% / 69,11 €
Scarce
pressure sensor, Ø38mm 122long, 0-50bar, 12-32V DC, G1/2 inch A, 2x PNP NC/NO, 0-10V/4-20mA / 0 … 20 mA, Plug-in connection M12 4pin, IP65, PA 6.6 (synthetic), With display, Front-flush membrane
Compare

Pressure sensors - Pressure monitor

Pressure sensors are suitable for measuring different media with high accuracy. They are available with switching output and/or analog output. Using PC software, the measured values can be recorded depending on the device type. These sensors can be used in all areas of e.g. pneumatic and hydraulic applications.

Electrical properties

Initial setting
0 - 10,000hPa
Response/decay time
5ms
Number of switching outputs
2
Type of switching function
Normally closed contact/normally open contact
Type of alarm output
PNP
Type of analog output
0 - 10V, 0 - 20mA, 4 - 20mA
Type of electrical connection
Connector M12
Type of switching output
PNP
Turn-off delay
0 - 20ms
Rated switching current
250mA
Readiness delay
2,000ms
Turn-on delay
0 - 20s
Setting procedure
Application software, Parameterization
End setting
40,000 - 50,000hPa
Relative hysteresis
1%
Short-circuit protection
Yes
No-load current
60mA
Measuring range pressure
0 - 50bar
Measurement method
Absolute
Number of pins
4
Relative linearity deviation
0.25%
Relative repeat accuracy
0.1%
Switching frequency
125Hz
Voltage drop
2V
Temperature drift over entire measuring range
0.2%
Reverse polarity protection
Yes
Decay time
5ms
Damping (analog output)
20s
Damping (displayed value)
20s
Operating voltage (DC)
12 - 32V
Output functions
Window function, Switching point, Hysteresis
Display
LED display
Suitable as 2-point control
Yes
Suitable as limiter
Yes
Suitable as monitor
Yes
Peak value memory
Yes

Mechanical properties

Type of process connection
G1/2 inch A
Design
Cylinder plain
Bursting pressure
600bar
Thread length
12mm
Thread pitch
1.81mm
Length
122mm
Max. operating pressure
75bar
Medium temperature
-20 - 80°C
Nominal pressure
50bar
Degree of protection (IP)
IP65
Housing material
PA 6.6 (synthetic)
Sensing element material
Stainless steel 1.4435
Diameter
38mm
Front-flush membrane
Yes
For liquid media
Yes
For pasty media
Yes

Other properties

Measuring display
Relative
Ambient temperature
-20 - 80°C
For hydraulic applications
Yes
For pneumatic applications
Yes
You can find accessories for DW34311F in these product groups:

Mounting clip for pressure sensors

Cable sockets M12 4-wire shielded

Interface cable for pressure sensors

Test protocol pressure sensors

Adapter M12 socket 4-pin / M8 connector 4-pin

Classification Class
eClass-7.0 27200614
eClass-7.1 27200614
eClass-8.0 27200614
eClass-9.0 27200614
eClass-9.1 27200614
ETIM-6.0 EC011478
ETIM-7.0 EC011478
Property Value
RoHS‑compliant Yes
Reach-compliant Yes
OzDS-compliant Yes
POP-compliant Yes
MTTF 140Jahr(e)
MTTFd 280Jahr(e)
MTTFd (worst case) 56Jahr(e)
IPF Product Group 360 pressure sensors
packaging dimensions 99 x 60 x 160mm
gross weight 380g
Customs tariff number 90262020
WEEE number 40951076
Compare