DISCONTINUED PRODUCT

VD580541

VD580541
On demand
rotary encoder, Ø58mm 60long, Full shaft 6mm, 100 pulses, 4.75-30V DC, -25-85°C, Push-pull, Connector M23 12pin, IP54, Aluminum
Compare

Encoder - Incremental

A rotary encoder is a device that converts a rotary motion into a digital output signal, which can be processed on a subsequent evaluation electronics. All of our encoders operate according to the principle of optical scanning. Inside the device there is a pulse disc on which is – depending on the encoder - a unique (absolute) or repetitive (incremental) line graduation, which is scanned by an optical system. The turning of the encoder shaft causes rotation of the pulse disc, which results in a corresponding sampling signal of the optical system. This is finally implemented by an integrated electronics in encoder-specific output signals (e.g. multi-turn, RS422 etc.). For professional installation in many applications, shaft couplings or resilient bases for mounting brackets or flanges are used. In addition, the encoder shaft can be equipped with measuring wheels or pinions in various designs and sizes.Typical applications include the angle measurement on bending machines, length measuring of belt systems or speed measurement on winding systems.

Electrical properties

Type of electrical connection
Connector M23
Type of switching output
Push-pull
Rated switching current
20mA
Increments per revolution
100
Short-circuit protection
Yes
Shaft length
10
No-load current
30mA
Number of pins
12
Switching frequency
150,000Hz
Signal outputs
A+B+0(+inverted)
Reverse polarity protection
Yes
Measurement principle
Operating voltage (DC)
4.75 - 30V

Mechanical properties

Start-up torque
0.01
Type of encoder shaft
Full shaft
Axial load capacity of shaft
20N
Encoder size
58
Shaft diameter
6mm
Flange
Clamping flange
Cable infeed
axial
Length
60mm
Max. rotation speed
10,000UpM
Radial load capacity of the shaft
40N
Shock resistance, acceleration
200g
Shock resistance, pulse time
6ms
Degree of protection (IP)
IP54
Moment of inertia
14.5gcm²
Vibration resistance, acceleration
10g
Flange material
Aluminum
Housing material
Aluminum
Vibration resistance Frequency
16 - 2,000Hz
Diameter
58mm

Other properties

Relative air humidity (non-condensing)
0 - 95%
Ambient temperature
-25 - 85°C
Version
You can find accessories for VD580541 in these product groups:

Fixing material, encoder 58

Cable sockets M23 12-pin

measuring wheel and coupling for solid shaft, 6mm diameter

Classification Class
eClass-7.0 27270590
eClass-7.1 27270590
eClass-8.0 27270590
eClass-9.0 27270590
eClass-9.1 27270590
ETIM-6.0 EC001486
ETIM-7.0 EC001486
Property Value
RoHS‑compliant Yes
Reach-compliant Yes
OzDS-compliant Yes
POP-compliant Yes
IPF Product Group 520 encoders
packaging dimensions 138 x 95 x 210mm
gross weight 310g
Customs tariff number 90318020
WEEE number 40951076
Compare