Encoder - Incremental

VD58C510

VD58C510
List price
368,30 €
On demand
rotary encoder, Ø58mm 55long, Full shaft 6mm, 1000 pulses, 4.75-30V DC, -25-85°C, Push-pull, Cable 12pin 4m, IP65, Aluminum

Encoder - Incremental

A rotary encoder is a device that converts a rotary motion into a digital output signal, which can be processed on a subsequent evaluation electronics. All of our encoders operate according to the principle of optical scanning. Inside the device there is a pulse disc on which is – depending on the encoder - a unique (absolute) or repetitive (incremental) line graduation, which is scanned by an optical system. The turning of the encoder shaft causes rotation of the pulse disc, which results in a corresponding sampling signal of the optical system. This is finally implemented by an integrated electronics in encoder-specific output signals (e.g. multi-turn, RS422 etc.). For professional installation in many applications, shaft couplings or resilient bases for mounting brackets or flanges are used. In addition, the encoder shaft can be equipped with measuring wheels or pinions in various designs and sizes.Typical applications include the angle measurement on bending machines, length measuring of belt systems or speed measurement on winding systems.

Electrical properties

Operating voltage (DC)
4.75 - 30V
Increments per revolution
1.000
No-load current
30mA
Switching frequency
150.000Hz
Type of switching output
Push-pull
Physical measurement principle
optical
Reverse polarity protection
Yes
Rated switching current
20mA
Shaft length
10
Number of pins
12
Type of electrical connection
Cable
Short-circuit protection
Yes
Encoder signal outputs
A+B+0

Mechanical properties

Ambient temperature
-25 - 85°C
Flange material
Aluminum
Cable infeed
axial
Encoder size
58
Vibration resistance, frequency
2.000Hz
Axial load capacity of shaft
20N
Shock resistance, acceleration
200g
Max. rotation speed
10.000UpM
Cable length
4m
Shaft diameter
6mm
Vibration resistance, acceleration
10g
Degree of protection (IP)
IP54
Flange
Clamping flange
Type of encoder shaft
Full shaft
Moment of inertia
14,5gcm²
Shock resistance, pulse time
6ms
Radial load capacity of the shaft
40N
Sensor length
55mm
Sensor diameter
58mm
Housing material
Aluminum

Other properties

Air humidity
0 - 95%
Version
Incremental encoder
Classification Class
eClass 7.0 27270590
eClass 7.1 27270590
eClass 8.0 27270590
eClass 9.0 27270590
eClass 9.1 27270590
ETIM-6.0 EC001486
ETIM-7.0 EC001486
Property Value
Customs tariff number 90318020
IPF Product Group 700 special devices
packaging dimensions 138 x 95 x 210mm
gross weight 621g
OzDS-compliant Yes
POP-compliant Yes
WEEE number 40951076