LED spindle light - Optimum lighting for machining

The spindles of machining centers in metal-cutting production are often not sufficiently illuminated, which makes it difficult to adjust the machine during set-up, especially for the production of small batches.

The aim:

Optimum illumination of the workpiece during setup and therefore ultimately greater precision as well as accuracy when machining workpieces.

The solution:

A particularly robust LED light specially developed for the spindle holder of a machining center, which is available from ipf electronic under the designation EMB50171. The light is suitable for both horizontal and vertical machining center spindle mounts with the appropriate diameters.

The ring light with borosilicate glass front panel is equipped with several high-power LEDs at 4 positions each (light exit openings). The extremely bright white light LEDs (color temperature 5,000K) with a beam angle of 80 degrees ensure particularly shadow-free and uniform illumination of the workpiece in the processing area.

The EMB50171 in a die-cast aluminum housing can be attached directly to the spindle mount using four screw points for M5 cylinder head screws. Alternatively, the light can also be fixed to the spindle holder using strong holding magnets such as AY000129 / AE000031. The LED spindle light is connected via a 4-pin M8 plug connector located on the side of the housing.