Optimally illuminated

LED spindle light for machining centers

With the EMB50171 IPF presents a ring light that has been specially developed for the spindle holder of a machining center.

Workpieces are often not sufficiently illuminated during the setting of machining centers in machining production. This is particularly the case when setting up machines prior to the machining production of small batches. In order to achieve optimum illumination of workpieces when setting up a machine and thus ultimately greater precision during machining, IPF has now developed the LED spindle light EMB50171 is now available from IPF. The light is suitable for both horizontal and vertical machining centers with the appropriate spindle diameters.

The ring light with borosilicate glass front screen is equipped with several high-power LEDs in four positions (light emission openings). The extremely bright white light LEDs (color temperature 5,000K) provide a particularly shadow-free and uniform illumination of the workpiece in the processing area with an angle of emitted beam of 80 degrees. In addition, the EMB50171 in IP67 is resistant to shock, vibration, flying chips and most coolants and lubricants. The LED spindle light is also equipped via electrostatic discharge protection (ESD protection) and can be used in a wide temperature range from -40°C to +50°C (from +50°C with overtemperature control).

The EMB50171 is fastened directly to the tool spindle with five cylinder head screws. Alternatively, it can also be attached with strong holding magnets (e.g. AY000129/AE000031). The connection is made via a four-pin M8 plug connector on the lateral side of the die-cast aluminum luminaire housing.